Mini-Mite 3 Platinum XPC-Series HVLP System Gravity Feed

Overview

The New Mini-Mite 3 Platinum™ system uses the most powerful 3-stage Turbine on the market (same as the Q3 Platinum™). This system is recommended for those who want the extra power available - a full 6.5 psi. As with the Mini-Mite 3 Platinum™, there is no noise reduction feature, so this should be taken into account if noise level is a factor. The G-XPC™ non-bleed Gravity Spray Gun also features an exclusive side Pattern Control Knob to adjust the Fan Size and comes installed with a 1.4mm Air Cap (High-Efficiency™) which is best for fine finishing with lacquers, enamels, polyurethanes, latex, water based coatings and more.

The G-XPC™ gun features the side mounted 400cc Gravity Cup and the tilt feature which easily allows the operator to spray in any direction including upwards. The angle of the Gravity Cup 400cc (.85 Pint) can be adjusted. This cup is now pressurized so you have the full range of spraying available to you.

The Platinum™ series is built with the Fuji Spray Heat Dissipation Box™. See below for the benefits of this technology.

The Fuji Spray Heat Dissipation Box™

Fuji Spray has designed a unique method of removing any heat build up from the Turbine case. Excess heat is channeled to a Heat Dissipation Box™ located at the rear of the case.
Because the hot air is dissipated evenly through an optimum surface area with 60 holes, there is no added hiss or loud whistling noise. There is also no blowing around of dust.
The benefits of a cooler running unit results in a longer life for your Turbine motor compared to standard Turbines

Spray cabinets, furniture, autos or pianos - in fact, anything wood or metal. A powerful, portable system for all fine-finishing.

What's included with the Mini-Mite 3™ T-Series System?

Specifications